Autosamplers and Sample Prep Solutions

HTA's Blog

Corporate and Product News

Cell Washers are not all the Same

A Cell Washer is an automated laboratory instrument designed to perform cell preparation procedures.

Today, different types of Cell Washers are available on the market. Although they share the same general designation, these instruments may differ in terms of their intended applications.

Depending on their intended purpose, these devices are designed and configured to perform different tasks and automate specific processing steps.

Understanding these differences is essential when evaluating and selecting the most suitable instrument for a specific laboratory need.

Cell Washers for Flow Cytometry

In flow cytometry, automated cell washers are used to prepare cellular samples for subsequent analysis by flow cytometers.

The starting material is typically a peripheral whole blood sample.

After fluorochrome-conjugated antibodies have been added to the whole blood specimen, the instrument can automate the subsequent preparation steps:

  • Red blood cell lysis: a lysis solution is added to induce erythrolysis, removing red blood cells while preserving the leukocytes of interest.
  • Cell washing: washing cycles remove residual red blood cell debris, unbound antibodies, platelets and other unwanted components.
  • Supernatant removal: the liquid phase containing residual reagents and cellular debris is separated from the leukocyte pellet.
  • Cell resuspension: the remaining white blood cells are resuspended in an appropriate buffer for subsequent flow cytometric analysis.


The final objective of these instruments is to obtain a clean, well-preserved leukocyte suspension suitable for flow cytometric analysis.

Discover HT4150L: HTA Cell washer for flow cytometry!

Cell Washers for Blood Banking

A different category of cell washers is specifically designed for blood banks and transfusion laboratories. In these settings, cell washing is required for several serological procedures, including blood grouping, antibody screening, antibody identification, and compatibility testing.

The starting material is typically a red blood cell suspension.

In particular:

  • Pre-transfusion testing: consists of a series of laboratory investigations performed to assess compatibility between the recipient and the blood component intended for transfusion.
  • Crossmatching: is one of the key procedures used to verify compatibility between donor red blood cells and recipient plasma or serum.


In these applications, the Cell Washer automates the washing of red blood cells using saline solution. The instrument performs repeated cycles of saline dispensing, centrifugation and supernatant decanting.

From both a design and operational perspective, these devices are considerably simpler than cell washers designed for flow cytometry.

    The purpose of washing is to isolate and obtain washed red blood cells in a clean suspension, suitable for subsequent serological testing. 

    A cell washer for blood banking is not currently included in HTA’s product portfolio.

    All rights reserved | Legal Disclaimer | Privacy and Cookies Policy | VAT: IT02173320173
    WhatsApp